Dr. Denner, speaking at the company’s annual press conference, announced a decisive breakthrough in diesel technology.

There’s a future for diesel. Today, we want to put a stop, once and for all, to the debate about the demise of diesel technology.

New developments from Bosch could enable vehicle manufacturers to reduce emissions of nitrogen oxides (NO_x) so drastically that they already comply with future limits. Even in RDE (real driving emissions) testing, emissions from vehicles equipped with the newly premiered Bosch diesel technology are not only significantly below current limits but also those scheduled to come into force from 2020.

Bosch engineers achieved these results by refining existing technologies. There is no need for additional components, which would drive up costs. Bosch is pushing the boundaries of what is technically feasible,

Denner said.

Equipped with the latest Bosch technology, diesel vehicles will be classed as low-emission vehicles and yet remain affordable.

The Bosch CEO also called for greater transparency with regard to the CO2 emissions caused by road traffic, and called for fuel consumption and thus CO₂ emissions to be also measured under real conditions on the road in the future.

Record readings under real driving conditions: 13 mg NO_x per kilometre. Since 2017, European legislation has required that new passenger car models tested according to an RDE-compliant mix of urban, extra-urban, and freeway cycles emit no more than 168 milligrams of NO_x per kilometre.

As of 2020, this limit will be cut to 120 milligrams. But even today, vehicles equipped with Bosch diesel technology can achieve as little as 13 milligrams of NO_x in standard legally-compliant RDE cycles. That is approximately one-tenth of the prescribed limit that will apply after 2020. And even when driving in particularly challenging urban conditions, where test parameters are well in excess of legal requirements, the average emissions of the Bosch test vehicles are as low as 40 milligrams per kilometre.

Bosch engineers have achieved this decisive breakthrough over the past few months. A combination of advanced fuel-injection technology, a newly developed air management system, and intelligent temperature management has made such low readings possible. NO_x emissions can now remain below the legally permitted level in all driving situations, irrespective of whether the vehicle is driven dynamically or slowly, in freezing conditions or in summer temperatures, on the motorway or in congested city traffic.

Diesel will remain an option in urban traffic, whether drivers are tradespeople or commuters,

Bosch delivered proof of this innovative advance at a major press event in Stuttgart. Dozens of journalists, from both Germany and abroad, had the opportunity to drive test vehicles equipped with mobile measuring equipment in heavy city traffic, under especially challenging conditions. As the measures to reduce NO_x emissions do not significantly impact consumption, the diesel retains its comparative advantage in terms of fuel economy, CO₂ emissions, and therefore climate-friendliness.

Artificial intelligence can further boost combustion engines’ performance. Even with this technological advance, the diesel engine has not yet reached its full development potential say Bosch. They now aim to use artificial intelligence to build on these latest advances. This will mark another step toward a major landmark: the development of a combustion engine that – with the exception of CO₂ – has virtually no impact on the ambient air.

Denner said

We firmly believe that the diesel engine will continue to play an important role in the options for future mobility. Until electromobility breaks through to the mass market, we will still need these highly-efficient combustion engines.

His ambitious target for Bosch engineers is the development of a new generation of diesel and petrol engines that produce no significant particulate or NO_x  emissions. Even at Stuttgart’s Neckartor, a notorious pollution black-spot, he wants future combustion engines to be responsible for no more than one microgram of NO_x per cubic metre of ambient air – the equivalent of one-fortieth, or 2.5 percent, of today’s limit of 40 micrograms per cubic metre.

Bosch wants to go further: transparency and realistic testing for consumption and CO₂. Denner also called for a renewed focus on CO₂ emissions, which are directly related to fuel consumption. He said that consumption tests should no longer be conducted in the lab but rather under real driving conditions. This would create a system comparable to the one used for measuring emissions. Denner said that means greater transparency for the consumer and more focused climate action.

Moreover, any assessment of CO₂ emissions should extend significantly further than the fuel tank or the battery:

We need a transparent assessment of the overall CO₂ emissions produced by road traffic, including not only the emissions of the vehicles themselves but also the emissions caused by the production of the fuel or electricity used to power them,

He added that a more inclusive CO₂ footprint would provide drivers of electric vehicles with a more realistic picture of the impact of this form of mobility on the climate. At the same time, the use of non-fossil fuels could further improve the CO₂ footprint of combustion engines.

Product development code: ethical technology design. Denner, who also has corporate responsibility for research and advance engineering, presented Bosch’s product development code to the general public. This lays down the company’s principles for the development of Bosch products. First, the incorporation of functions that automatically detect test cycles is strictly forbidden. Second, Bosch products must not be optimized for test situations. Third, normal, everyday use of Bosch products should safeguard human life as well as conserve resources and protect the environment to the greatest possible extent.

Denner said

In addition, the principle of legality and our ‘Invented for life’ ethos guide our actions. If in doubt, Bosch values take precedence over customers’ wishes,

Since mid-2017, for example, Bosch has no longer been involved in customer projects in Europe for petrol engines that do not involve the use of a particulate filter. A total of 70,000 associates, mainly from research and development, will receive training in the new principles by the end of 2018, as part of the most extensive training program in the company’s more than 130-year history.

Bosch set the questions and answers for the new technology.

What distinguishes the new diesel technology ?

To date, two factors have hindered the reduction of NO_x emissions in diesel vehicles. The first of these is driving style. The technological solution developed by Bosch is a highly responsive air-flow management system for the engine. A dynamic driving style demands an equally dynamic recirculation of exhaust gases. This can be achieved with the use of a RDE-optimized turbocharger that reacts more quickly than conventional turbochargers. Thanks to a combination of high- and low-pressure exhaust-gas recirculation, the air-flow management system becomes even more flexible. This means drivers can drive off at speed without a spike in emissions.

Equally important is the influence of temperature. To ensure optimum NO_x conversion, the exhaust gases must be hotter than 200 degrees Celsius. In urban driving, vehicles frequently fail to reach this temperature. Bosch has therefore opted for a sophisticated thermal management system for the diesel engine. This actively regulates the exhaust-gas temperature, thereby ensuring that the exhaust system stays hot enough to function within a stable temperature range and that emissions remain at a low level.

When will the technology be ready for production ?

Bosch’s new diesel system is based on components that are already available in the market. It is available to customers effective immediately and can be incorporated into production projects.

Why is urban driving more demanding than extra-urban or freeway driving ?

To ensure optimum NO_x conversion, the exhaust gases must be hotter than 200 degrees Celsius. This temperature is often not reached in urban driving, when cars are stuck in jams or stop-and-go traffic. As a result, the exhaust system cools down. Bosch’s new thermal management system remedies this problem by actively regulating the exhaust gas temperature.

Does the temperature regulation require an auxiliary 48-volt heater installed in the exhaust-gas system or additional components of a similar kind ?

Bosch’s new diesel system is based on components already available in the market and does not require an additional 48-volt on-board electrical system.

Will the new Bosch technology make the diesel engine significantly more expensive ?

The Bosch diesel technology is based on components already in use in production vehicles. The decisive advance comes from a new combination of existing technology. It does not require any additional hardware components. So reducing emissions will not make diesel vehicles any less affordable.

Will the diesel engine lose its comparative advantage in fuel economy and climate-friendliness as a result of the new technology ?

No. Our engineers’ goal was clear: to reduce NO_x emissions while retaining the diesel’s comparative advantage in terms of CO₂ emissions. Diesel will thus remain a climate-friendly option.